Happy Friday Everyone!
In BC we are gearing up for the International Seating Symposium that is being held at the Westin Bayshore in Vancouver. This is a super exciting week for those in the wheelchair seating and mobility world. I will be presenting this year along with Lindsay Alford (OT). We will be presenting an instructional session called “The Art of Balance: Function and Posture in Wheelchair Seating”. We will be introducing a clinical reasoning model that we developed. Hope to see some of you there! Here is the link to the brochure if you are interested!
Also, Access Community Therapists will be also be hosting the “Introduction to the Assessment and Management of Eating, Drinking and Swallowing Disorders: A Clinical Approach” workshop on April 28th and 29th. Register quickly if you are interested as spaces fill very quickly! Check out the website for more information.
I thought that I would post some of the positioning belts that I’ve done over the years. Positioning belts can be critical in a seating system from a postural perspective, but are often so complex to integrate into a system as they can often have an impact on the way a client functions. Since we are presenting on this very topic, I thought I would give all of you a sneak peek!
Here is a custom pelvic support with with angular molded sub-asis pads. The sub-asis pads are secured with swing away harware. Between the sub-asis pads, there are flexible straps connected with a standard push button buckle. The purpose of this belt was to create a rigid system that the client could use when her tone was quite strong. Alternatively, when her tone was quite mild, she could leave the swing away hardware open and simply secure the buckle to allow her to move more freely in the system. Cool eh?
Here is an example of how changing a buckle can make all the difference in the world! This client couldn’t use a positioning belt before as it would impede his ability to transfer quickly. By introducing an airplane style buckle, he was now able to use a positioning belt, which prevented him from sliding down in his seating. YAY!
Here is a semi-rigid pelvic support made with custom sub-asis pads. This system was made for a client who needed more rigid pelvic support but needed to fasten and un-fasten the belt independently. This belt was also done in combination with a dynamic backrest on a light-weight rigid wheelchair frame. This is a nice example of how it is possible to improve postural control while maintaining a client’s ability to function independently.
This one is a custom arcufit style belt with a swing away hardware again. The purpose of this hardware though, was to clear the belt out of the way so that the back canes could be folded down to transport the wheelchair in a trunk.
Here is a custom rigid pelvic saddle. This system was created to prevent a client with very limited hip flexion from sliding down in their seating system. Note how much anterior control was needed to keep the client up in the system in order to maintain her ability to drive and be independent in the community.
Remember this one? This is a custom “posey” style belt used in an alternate positioning device. This system was made for a client with a lot of tone that wanted a more comfortable option. In his mobility system, he uses a semi-rigid system. This is a nice alternative that is also necessary to reduce his risk for skin breakdown in a very rigid system that he has in his wheelchair.
I hope you liked this collection of positioning belts.For those of you going to the ISS this year, see you next week!
Thanks for checking in! Seating is Super!