Happy Friday Everyone! Last week Access Community Therapists and Advanced Mobility Products hosted a workshop called “The Pressure is On: A Model of Practice for Occupational Therapists”. This was a 2-day intensive and interactive workshop on wound prevention, assessment, management and treatment. The workshop instructors included Jo-Anne Chisholm (OT), Joanne Yip (OT), Heather McMurtry (RN, WOCN), Lindsay Alford (OT) and Cheryl Hon (Me!!..I’m an OT). It was a great workshop with a great turn out!
On the first day, we focused on an interdisciplinary model of practice for wound care and treatment. The images below capture some of the days events. Wound prevention equipment, cushions, mattresses and wound dressings galore! We also focused on preventing under and over prescription of medical equipment for wounds. This is such a big issue when it comes to wound care and prevention. The second day was all about Pressure Mapping. We even had help from some client educators who helped us practice pressure mapping skills and interpretation. Thanks again to everyone who was able to make it!
Now, onto some fun seating tips and tricks! I thought that I would share some of my recent seating mods, accessories and ideas. Perhaps these might work for some of your clients! Here we go!
Below is a wheelchair and seating system that was set-up by Jody Mair from Motion Specialties. This client had CP and required an arcufit belt for pelvic stability. Pelvic laterals were not an option for her because of the way she transferred and moved in her wheelchair. A swing away mount was used on her pelvic belt as her family needed to fold the back canes down in order to fit it into their vehicle. Without this mount, the back canes would not fold down far enough. Although swing away brackets were not as strong as solid brackets, for this client it was sufficient.
Next! A custom pelvic harness for an alternate positioning device/comfy chair. This comfy chair was custom fabricated by Russ Bain at Ability Health Care and the harness was made by Chad Kania. This comfy chair had power tilt and was made with custom carved foam cushions. The client that used this system had extremely limited hip flexion, significant postural deformities and was prone to skin breakdown due to constantly moist and fragile skin. Due to limited hip flexion, keeping this client in an upright position was extremely difficult. On his manual wheelchair, he had a foam-in-box seating system with a custom molded pelvic bar. We didn’t want to do the same in his comfy chair as this was meant for him to be positioned upright, but in a more relaxed position. So, this is what we did! A mesh fabric, posey-style pelvic harness that was secured with 2 clips on the sides. The mesh fabric was breathable to prevent moisture build up. The harness itself helped to prevent sliding down in the system, but was soft to prevent pressure and to enhance comfort.
Here is a custom mounted cup holder and stylus holder that was fabricated by Wahbi Ghanbur at Advanced Mobility Products. This system was made for a client with Quadriplegia. This client uses a stylus in the community to reach and access buttons (such as elevator buttons) and pin pads in the community. If you haven’t noticed, most pin pads at store check-outs have a “security cover” over the buttons. For someone with Quadriplegia (or anyone who has difficulty isolating finger movements), these are next to impossible to access. The stylus is an effective tool here, IF it can be easily accessed by the person of course! So here was my solution to the problem: a custom mounted holder for the stylus! The cover at the top is actually made of soft rubber to prevent the stylus from falling out.
Here is a rather simple solution for feet on wheelchairs. GRIP TAPE! YAY for grip tape! I use grip tape quite often on footplates as it often helps to prevent feet from sliding off or out of position. This was a rather nice application of grip tape on a manual rigid wheelchair. As you can see, there is no actual plate, but wrapping the grip tape around the tubes was a nice way to keep the tape in place. This was also done by Wahbi at Advanced Mobility Products.
And last but definitely not least, here are some custom modifications that were designed and fabricated by Ed Bell at Advanced Mobility Products for a home weight machine. This system was made for a client with paraplegia who used a manual rigid frame wheelchair for mobility. The custom adaptations involved a custom thigh bar that was similar to those flip down bars on a chair lift at the ski hills or the flip down bars on an amusement park ride like the Coaster at the PNE. This helped to keep the client and wheelchair on the ground when using the weights and pulleys. In addition to this, the system also had custom clamps that secured to the front rigging of the wheelchair. This was needed to keep the front end of the wheelchair down and in place to prevent the client from flipping backwards when using the weights.
I hope you enjoyed some of my tips and tricks! Have a great weekend everyone!
Seating is Super!