The 30th International Seating Symposium Part 2

Hello Everyone! I hope you had a great weekend. I’m finally posting the rest of my photos from the ISS, which was a couple of weeks ago now. After the ISS, I went away to Jamaica for a vacation with my husband and friends. It was a lovely vacation in the sun with lots of jerk chicken! But now, back to business! The first couple of photos is of the Mount’n Mover mounting system. This is a nice system that can be used to set up trays, ipads or really anything. On their website, they even feature a photo of a camera being mounted and used by a client. It’s a nice design with lots of positioning options. A bit on the pricey side (like most mounting systems), but still a nice looking, practical option.

There were a lot new changes to cushions and new cushions at the Symposium this year. Vicair has come out with a Hybrid cushion and have made some changes to their cushions overall. The Vicair air cells will now be sealed into bags in each of the cushion cells. This is meant to prevent them from migrating into neighboring cells when you are trying to adjust the cushion. This also means that it will be one more section to open to gain access to the cells. They are also apparently revising their air cells. There have been some issues with the air cells deflating, but this issue is expected to be fixed. Comfort company will also be releasing changes to their version of the Vicair cushions, which involve a different covering of the cushion all together to prevent loosening or breaking of the seams between the cells and improved comfort with a thicker, airmesh-like material. They are also incorporating a stretch fabric into the cover for better immersion at the rear of the cushion. I think these changes definitely look promising. The Vicair cushion is definitely a cushion that needs to be trialed and can be right for a specific client as they are a firmer, pressure relieving cushion. It is by no means a “maintenance free” cushion as I’ve found that I’ve needed to monitor the air cells for flat ones. Other companies like Invacare and Sunrise (more specifically, the Jay line) were also demonstrating their new fluid gel type cushion. Although these ones are not officially on the market, they are ones to look out for very soon!

During the ISS, I attended a couple of sessions by Kelly Waugh (PT) and Barbara Crane (PT) who presented extensively on postural measurement in seating. I found their instructional sessions to be very interesting, detailed and informative as they proposed a more accurate way to measure specific body angles. The measurement strategy they propose also addresses the issue of having the measure the client, the convert these measurements into the angles of the seating system, which we all know can sometimes be confusing when documenting. Click here to access a guide to wheelchair seated posture measurement. Below is a photo of an angle finder with a ruler attached to the bottom as well as a new device called the Horizon that was developed by Takashi Handa from Japan. The long arms on the Horizon tool allow the clinician the line up the digital angle finder to the boney landmarks on the client. For example, when measuring a pelvic obliquity, the two vertical posts can be aligned with the client’s ASIS on each side the the device will indicate the angle of the pelvic obliquity. This can also be used to measure pelvic tilt, which is a hard measurement to get particularly when the client is seated in their seating systems. During their presentations, they also demonstrated a software system called Rysis, which is a photographic assessment systems that landmarks a client’s body for measurement purposes. These devices take measurement to a whole new level. Although the measurements themselves may not significantly change the configurations of the systems we are currently making, I think it will be interesting to see where this technology and these measurement techniques will take us with regards to how systems are built in general. One of the plenary sessions reviewed the advances in 3D printing and what this could mean with regards to developing different aids and seating components and even seating systems. Who knows what the future may hold…..

Invacare has released a carbon fiber backrest. It is a nice mild contoured, lightweight backrest. The only issue may be the mounting bracket that was shown at the ISS. It may limit the position in which the back can be mounted as it is secured to the crossbar of the wheelchair. There may be other ways to mount this backrest though so follow up with your sales reps about this if you choose this back to trial.

Icon wheelchairs were also showing off their highly adjustable wheelchair. This base is quite different as it can be easily adjusted by the user for functional purposes. It is adjustable in 15 elements including wideth, height and seat angle. It also has an unique suspension system that is meant to greatly enhance the ride and comfort of the wheelchair.

These were the highlights from the ISS that I could collect for you. I apologize if I have missed anything, but please feel free to send me anything you found or would like to add! Motion Specialties has also passed on their summary of the ISS to me.  I’ve attached it  here (ISS 2014) for you to check out as well. Thanks for checking in today!

Seating is Super!

Cheryl

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s